Subaru Forester: Air inlet selection button
Air inlet selection button
ON position (Recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position.
The indicator light will illuminate.
Place the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road.
OFF position (Outside air): Outside air is drawn into the passenger compartment.
Push the air inlet selection button again to the OFF position. The indicator light will turn off.
Place the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty.
Continued operation with the air inlet selection button in the ON position may fog up the windows.
Switch to the OFF position as soon as the outside dusty condition clears.
Air conditioner button
Air conditioner button
The air conditioner operates only when
the engine is running.
Push the air conditioner button while the
fan is in operation to turn on the air
conditioner. The indic ...
Heater operation
NOTE
- Models with air conditioner system:
When the “” or “”
position is
selected, the air conditioner compressor
automatically operates regardless
of the position of the air condi ...
See also:
Drive
Never select a forward gear
when the
vehicle is in rearward motion.
Gear changing is fully automatic. Shift points
are determined by accelerator pedal position
and current road speed. ...
Two-Wheel Drive Models
The manufacturer recommends towing your vehicle with
all four wheels OFF the ground using a flatbed.
If flatbed equipment is not available, and the transmission
is operable, the vehicle may be to ...
Inserting the remote key
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustration
and press it in as far as possible (past the
detent) ...
