Nissan Rogue: Air conditioner operation - Manual air conditioner - Heater and air conditioner - Center display, heater, air conditioner, audio, phone 
and voice recognition systems - Nissan Rogue Owner's ManualNissan Rogue: Air conditioner operation

The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication.

Cooling:

This mode is used to cool and dehumidify the air.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position.

- For quick cooling when the outside temperature is high, push the air recirculation button to to the ON position. Be sure to push the air recirculation button to the OFF position for normal cooling.

- A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Dehumidified heating:

This mode is used to heat and dehumidify the air.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

Dehumidified defogging:

This mode is used to defog the windows and dehumidify the air.

1. Turn the air flow control dial to the position. position.

2. Turn the fan speed control to the dial to the desired position.

3. Push the A/C button on. (The A/C indicator light will illuminate.) 4. Turn the temperature control dial to the desired position.

    Heater operation
    Heating: This mode is used to direct heated air to the foot outlets. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control ...

    Automatic air conditioner
    1. Air flow control dial 2. Temperature control dial 3. Fan speed control dial 4. Rear window defroster button (See “Rear window and outside mirror defroster switch” in the “2. Instrum ...

    See also:

    General notes
    If you cannot lock or unlock the vehicle with the SmartKey, either the battery in the SmartKey is discharged, the SmartKey is faulty or the starter battery is discharged. Check the battery in ...

    How the SRS Indicator Works
    The SRS indicator alerts you to a potential problem with your airbags or seat belt tensioners. When you turn the ignition switch to the ON (II) position, this indicator comes on briefly t ...

    Voice
    - Command list: View the categories and the acceptable voice commands. Select an Information button to view alternative function commands. - Voicetags: View the categories. Select a category to m ...