Toyota RAV4: Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle from outside the vehicle.
Vehicles without smart key system
1 Locks all doors
2 Pushing and holding: Sounds alarm
3 Unlocks all doors
Pressing the button unlocks
the driver’s door. Pressing
the button again within 3
seconds unlocks the other
doors.
Vehicles with smart key system
1 Locks all doors
2 Unlocks all doors
Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
3 Pushing and holding:
Sounds alarm
- Operation signals
- Panic mode
- Door lock buzzer
- Key battery depletion
- If the wireless remote control does not operate
- Security feature
- Conditions affecting operation
- Customization that can be configured at Toyota dealer
- Certification for wireless remote control (vehicles without smart keysystem)
Certification for the smart key system
For vehicles sold in the U.S.A.
FCC ID: NI4TMLF-2
FCC ID: HYQ14AEM
FCC ID: HYQ13BZS
FCC ID: HYQ14ABK
FCC ID: HYQ13CZA
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subj ...
Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice) ...
See also:
Pause
When the audio system volume is turned off
completely, the player will pause and will
resume playing when the volume is turned up
again. ...
Condensation
Misting of lamp lenses can occur under some
atmospheric conditions. This will not affect the
performance of the lamps and will clear during
normal operation. ...
Operating tips (for automatic air conditioner)
When the engine coolant temperature and
outside air temperature are low, the air flow
from the foot outlets may not operate for a
maximum of 150 seconds. However, this is not a
malfunction. Af ...
