Subaru Forester: When you do not tow a trailer
- Remove the ball mount from the hitch receiver tube and insert the receiver cover onto the hitch receiver tube.
- Place the dust cap over the four-pin connector of the hitch wire harness to protect against possible damage.
- Occasionally lubricate terminals of the four-pin connector using terminal grease.
Connecting a trailer
1. Remove the receiver cover from the
hitch receiver tube. Then insert the ball
mount into the hitch receiver tube.
2. Insert the hitch pin into the hole on the
hitch receiver tube so that ...
Trailer towing
Your vehicle is designed and intended to
be used primarily as a passenger-carrying
vehicle. Towing a trailer puts additional
loads on your vehicle’s engine, drivetrain,
brakes, tires and sus ...
See also:
Sunroof
On vehicles with a sunroof, the switches used to operate it are on the headliner
above the rearview mirror. The ignition must be in ON/ RUN or ACC/ACCESSORY, or
in Retained Accessory Power (RAP) t ...
Towing a disabled vehicle
Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use of safety chains is recommended.
Attach towing device to main structural members
of the vehicle, not to bump ...
Fluids
NOTE
Each quantity indicated here is only a guideline. The necessary quantity for
replacement may differ slightly depending on the
temperature and other factors.
For the checking procedure, o ...
