Range Rover Evoque: Voicetags
Voicetags enable the user to personalise the Voice system so that a single name can be used to call-up a navigation destination, telephone number or radio channel.
To add a Voicetag: 1. Briefly press the Voice button to start a Voice session.
2. Wait for the tone to sound then say Phone, Navigation or Radio.
3. Say Store voicetag.
Alternatively, Voicetags can be managed via the touch screen as follows.
1. Select Setup from the Home menu.
2. Select Voice from the Setup menu.
3. Select Voicetags from the Voice settings menu.
4. Select the system which the Voicetag is to activate (Phone, Navigation or Radio).
Follow the on-screen and audible instructions.
READ NEXT:
Navigation poi voice commands
To request the display of POI (Point Of Interest)
identifiers on the navigation display:
- Say Navigation, followed by the name of
the desired P.O.I category from the
following list;
- Petrol sta
Bluetooth® information
Bluetooth® is the name for
short-range radio frequency (RF)
technology that allows electronic
devices to communicate wirelessly with each
other.
The Land Rover Bluetooth® system supports
Blu
SEE MORE:
Engine Wiring Harness GTDi 2.0L Petrol
Removal
CAUTIONS:
Make sure that the wiring harness is not twisted or damaged on removal. Failure
to follow this instruction may result
in damage to the vehicle.
Take extra care not to damage the wiring harness clips.
NOTE: Removal steps in this procedure may contain installation details.
1. Disc
Replacement sensor
Should the sensor require replacing, it should
be carried out by a Dealer/Authorised Repairer.
A replacement sensor must be fitted to a
running wheel in order to be recognised by the
system. The vehicle needs to be stationary for
15 minutes during the sensor fitment before
the system is ready
© 2011-2024 Copyright www.rrevoque.org
