Mercedes-Benz GLK-Class: Vehicles with automatic transmission
- Apply the parking brake firmly.
- Shift the transmission to position P.
Using the SmartKey
- Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.
The SmartKey can only be removed if the transmission is in position P.
Using KEYLESS-GO
- Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.
When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".
If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.
In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.
Vehicles with manual transmission
Shift to either first gear or reverse gear R. Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated. Apply the parking brake firmly. ...Parking brake
WARNING Engaging the parking brake while the vehicle is in motion can cause the rear wheels to lock up. You could lose control of the vehicle and cause an accident. In addition, the vehicle& ...See also:
Dual Temperature Control
EX-L model only
The temperatures of the driver’s side
and the front passenger’s side can be
controlled independently when the
indicator in the DUAL button is on.
To adjust the driver†...
Installing the ball coupling
WARNING
If the vehicle/trailer combination is not secured, the trailer may come loose.
As a result, you could cause an accident.
Observe the ball coupling manufacturer's installation inst ...
Playing a USB Flash Memory Device (Canadian EX model and EX-L model without
navigation system)
Playing a USB Flash Memory Device (Canadian EX model and EX-L model without
navigation system) ...