Mitsubishi Outlander: Vehicle labeling
1-Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the illustration.
2-Vehicle information code plate
The vehicle information code plate is riveted as shown in the illustration. The plate shows model code, engine model, transmission model and body colour code, etc. Please use this number when ordering replacement parts.
1- Model code. 2- Engine model code. 3- Transmission model code. 4- Body colour code. 5- Interior code. 6- Option code. 7- Exterior code.
Vehicle identification number plate (RHD vehicles only)
This is stamped on the number plate riveted to the left front corner of the instrument panel pad. It is visible from outside of the vehicle through the windscreen.
Engine number
*: Front of the vehicle.
The engine number is stamped on the engine cylinder block as shown in the illustration.
Specifications
...See also:
Releasing the electric parking brake
Parking brake control
Manual release
1. Fasten the seat belt.
2. Insert the remote key in the ignition slot (or
press the START/STOP ENGINE button
on vehicles with the optional keyless drive) ...
Jump starting
If jump starting is necessary, see “Jump starting”
in the “6. In case of emergency” section. If the
engine does not start by jump starting, the
battery may have to be replaced. Contact a ...
Seat Adjustment
WARNING: Never attempt to adjust
the driver’s seat or seatback while driving. The seat or seatback could move unexpectedly,
causing loss of control. Make sure that the driver’s seat and seatb ...