Range Rover Evoque: Using the system

The system is operated using the remote control.

To release the remote from the docked position, press at the top of the remote (1) to unlatch it.

remote Do not attempt to pull the remote control out of its docked position.

Using the appropriate button (6) or (10) or on

Using the appropriate button (6) or (10) or on screen soft key (right or left) to select the required screen, will allow options to be set and selected.

Note: A help screen is available from each screen/menu. To view the help screen for guidance on the available functions and options, touch the question mark (?) icon.

Headphones

READ NEXT:

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

 Voice control

SEE MORE:

 Restraints Control Module (RCM)

Removal NOTES: The RCM must be replaced after every time any SRS component has been deployed. Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Disconnect

 Manual Transmission/Transaxle External Controls

Torque Specifications External Controls - Component Location COMPONENT LOCATION Shift cables Gear knob Selector lever assembly Selector lever mounting plate External Controls - Overview OVERVIEW The manual transmission external controls comprise a selector lever and two shift cables. The se

© 2011-2024 Copyright www.rrevoque.org