Ford Escape: Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Lamp assembly condensation
Exterior lamps are vented to accommodate normal changes in pressure.
Condensation can be a natural by-product of this design. When moist air
enters the lamp assembly through the vents, there is a ...
Replacing headlamp bulbs
1. Make sure the headlamp control is in the off position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb by turning it
counterclockwise and then pulling it
straight out.
...
See also:
Supported MP3 File Formats
The radio will recognize only files with the *.MP3 extension
as MP3 files. Non-MP3 files named with the *.MP3
extension may cause playback problems. The radio is
designed to recognize the file a ...
Conserving electrical current
Keep the following in mind to help minimize
battery drain:
• When the engine is not running, avoid
using ignition mode II. Many electrical systems
(the audio system, the optional navigation
...
Interior Light Switch
Center
Rear
This light switch has three positions which function as described below:
(1) The light comes on and stays on regardless of whether the door is open or
closed. (2) The light comes on ...
