Toyota RAV4: Using the Bluetooth® audio/phone for the first time
Before using the Bluetooth® audio/phone, it is necessary to register a Bluetooth® device in the system. Follow the procedure below to register (pair) a device:
1 Press
and select “Bluetooth”
using 
.
2 Press and select “Pairing”
using .
A passkey will be displayed.
3 SSP (Secure Simple Pairing) incompatible Bluetooth® devices: Input the passkey into the device. SSP (Secure Simple Pairing) compatible Bluetooth® devices:
Select “Yes” to register the device. Depending on the type of device, it may register automatically.
If a Bluetooth® device has both music player and cellular phone functions, both functions will be registered at the same time. When deleting the device, both functions will be deleted at the same time. If the off-hook switch is pressed and the “PHONE” mode is entered when no phones have been registered, the registration screen will be automatically displayed.
Using the Bluetooth® audio/phone
1 Bluetooth® connection condition
If “BT” is not displayed, the
Bluetooth® audio/phone
cannot be used.
2 Display
A message, name, number,
etc. is displayed.
Lower-case characters and
s ...
Menu list of the Bluetooth® audio/phone
■Bluetooth® audio/phone system functions
Depending on the Bluetooth® device, certain functions may not be available. ...
See also:
Using panic alarm
If you are near your vehicle and feel threatened,
you may activate the alarm to call attention as
follows:
1. Push the PANIC button 3 on
the
keyfob for more than 1 second.
2. The theft warn ...
Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10‑65
for more information.
2. For vehicles with a wheel cover or center cap, pull the cover or center cap
away from ...
Playing an MP3 CD
For vehicles equipped with the MyLink or IntelliLink infotainment system, see
the separate MyLink/ IntelliLink Features and Functions Guide for more information.
To play an MP3 CD, follow the same ...
