Jeep Liberty: Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle.
Press the switch forward and hold it, the Sky Sliderâ„¢ will open from the rear and move toward the front of the vehicle.
NOTE: During operation, any movement of the Sky Sliderâ„¢ switch will stop the Sky Sliderâ„¢ roof.
Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and ...See also:
Remote starting system
This system uses the Remote
Keyless Entry
(RKE) transmitter to start the engine conveniently
from outside the vehicle while still
maintaining security. The system has a range of
approximatel ...
Disconnecting a USB Flash Memory Device
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Always follow the USB
flash memory device’s instructions
when you remove it ...
Checking the coolant level
Only check the coolant level when the vehicle is on a level surface and the engine
has cooled down.
Turn the SmartKey to position 2 () in the ignition lock. On
vehicles with KEYLESS-GO, press ...