Volvo XC60: Using HDC - Hill Descent Control (HDC) - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Using HDC

HDC allows the car to roll forward at a maximum speed of 6 mph (10 km/h), and 4 mph (7 km/h) in reverse. However, the accelerator pedal can be used to select any speed that is possible in first or reverse gears. When the accelerator pedal is released, speed is quickly reduced again to 6 mph (10 km/h) or 4 mph (7 km/h), depending on the gear selected, regardless of the hill's gradient. It is not necessary to apply the brakes.

• The brake lights illuminate automatically when HDC is controlling the vehicle's speed.

• The driver can slow or stop the vehicle at any time by applying the brakes.

HDC is deactivated when:
• The button on the center console is pressed
• A gear higher than first gear is selected
• D is selected on vehicles with an automatic transmission

HDC can be deactivated at any time. If this is done while driving down a steep hill, the system's braking effect will decrease gradually.

NOTE
Engine response to pressure on the accelerator pedal may be slightly slower than normal when HDC is activated.

    Function
    • HDC can be switched on and off with the button in the center console. An indicator light in the button illuminates when HDC is activated. • The indicator light in the instrument pa ...

    See also:

    Technical Information
    The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your v ...

    Door Locks
    To lock or unlock the vehicle from the outside, press or on the Remote Keyless Entry (RKE) transmitter. There is a power door lock switch on the instrument panel. There are power door lock s ...

    Protection
    For appearance purposes, you may wish to protect the acrylic (cloth) top periodically. Afabric protectant such as Scotchguard is suggested. The top should be clean and dry before application of ...