Subaru Forester: Use of engine braking - Braking tips - Braking - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: Use of engine braking

Remember to make use of engine braking in addition to foot braking. When descending a grade, if only the foot brake is used, the brakes may start working improperly because of brake fluid overheating, caused by overheated brake pads. To help prevent this, shift into a lower gear to get stronger engine braking.

    When the brakes get wet
    When driving in rain or after washing the vehicle, the brakes may get wet. As a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while light ...

    Braking when a tire is punctured
    Do not depress the brake pedal suddenly when a tire is punctured. This could cause a loss of control of the vehicle. Keep driving straight ahead while gradually reducing speed. Then slowly pul ...

    See also:

    Remote Vehicle Start
    With this feature the engine can be started from outside of the vehicle. ...

    Checking the oil level
    1) Yellow handle Check the oil level monthly. 1. Park the vehicle on a level surface and stop the engine. 2. Pull out the level gauge, wipe it clean, and insert it again. 1) Upper level ...

    Sonar system (if so equipped)
    - The sonar system is a convenience but it is not a substitute for proper parking. Always look around and check that it is safe to do so before parking. Always move slowly. - Read and u ...