Mitsubishi Outlander: Turn-signal lever - Instruments and controls - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Turn-signal lever

1- Turn-signals. When making a normal turn, use position (1). The lever will

1- Turn-signals. When making a normal turn, use position (1). The lever will return automatically when cornering is completed. 2- Lane-change signals. When moving the lever to (2) slightly to change a lane, the side turn-signal lamps and indicator lamp in the instrument cluster will only flash while the lever is operated. Also, when you move the lever to (2) slightly then release it, the side turn-signal lamps and indicator lamp in the instrument cluster will flash three times.

NOTE:
● If the lamp flashes unusually quickly, the bulb in a turnsignal lamp may have burned out. We recommend you to have the vehicle inspected.
● It is possible to activate the following functions. For further information, we recommend you to consult a MITSUBISHI MOTORS Authorised Service Point. On vehicles equipped with Mitsubishi Multi-Communication System (MMCS), screen operations can be used to make the adjustment. Refer to the separate owner’s manual for details. • Flashing of the turn-signal lamps when the lever is operated with the ignition switch in the “ACC” position • Deactivate the turn-signal lamp 3-flash function for lane changes
● You can adjust the time required to operate the lever for the 3-flash function. For further information, we recommend you to consult a MITSUBISHI MOTORS Authorised Service Point.

    Headlamp levelling
    Except for vehicles with discharge headlamps The angle of the headlamp beam varies depending upon the load carried by the vehicle. The headlamp levelling switch can be used to adjust the headlamp ...

    Hazard warning flasher switch
    Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency. The hazard warning flashers can always be operated, regardless of the position of the ignit ...

    See also:

    USB memory operation
    Audio main operation: The USB outlet connector is located in the center console. Open the lid and connect a USB memory as illustrated. Then, switch to the USB memory mode automatically. If t ...

    Towing a Disabled Vehicle
    Emergency Towing If your vehicle is disabled, it may be towed by a tow truck using one of the following methods: 1) Tow the vehicle with two wheels lifted by the tow truck and the other two wheel ...

    Easy Exit Seat — If Equipped
    This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the SELECT button until “On ...