Volvo XC60: Troubleshooting - City Safety - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Troubleshooting

If Windscreen Sensors blocked appears in the information display, this indicates that the City Safety™ laser sensor is obstructed in some way and cannot detect vehicles ahead of you, which means that the system is not functioning.

However, this message will not be displayed in all situations in which the sensor is obstructed.

For this reason, the driver must ensure that the area of the windshield in front of the sensor is always kept clean.

The following table shows some of the situations that can cause the message to be displayed and suggested actions.

CAUTION

CAUTION If a crack, scratch or stone chip should occur in the section of the windshield in front the laser sensor and covers an area of approximately 1/50 x 1/10 in. (0.5 x 3 mm) or larger, contact a trained and qualified Volvo service technician to repair or replace the windshield (see the illustration showing the location of the sensor on page 168).
Failing to do so may result in reduced City Safety™ functionality.
To help prevent reduced functionality, please also observe the following:
• If the windshield is replaced, use the same type or a windshield approved by Volvo.
• When replacing windshield wipers, use the same type or ones approved by Volvo.

    Limitations
    The sensor used by City Safety™ is designed to detect cars and other larger motor vehicles ahead of your vehicle in both daylight and darkness. However, there are certain limitations and the ...

    The laser sensor
    The upper decal describes the laser beam's classification and contains the following text: Invisible Laser radiation – Do not view directly with optical instruments (magnifiers) – Class 1 ...

    See also:

    To Use The Engine Coolant Heater
    1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The electrical cord is located on the passenger side of the engine compartment, in front of the air cleaner. 3. Plug it in ...

    Using a flat-bed truck
    This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the select lever into the “P” position for automatic transmission mode ...

    Tire rotation direction mark
    Example of tire rotation direction mark 1) Front If the tire has the rotation direction specification, the tire rotation direction mark is placed on its sidewall. When you install a tire that ...