Jeep Liberty: Trailer Hitch Classification - Trailer Towing - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Trailer Hitch Classification

Your vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Your vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional Trailer Tow Prep Package. See your authorized dealer for package content.

The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow. This should be used to assist you in selecting the correct trailer hitch for your intended towing condition.

Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)” chart for the Max. GTW towable for your given drivetrain.

All trailer hitches should be professionally installed on

All trailer hitches should be professionally installed on your vehicle.

    Common Towing Definitions
    The following trailer towing related definitions will assist you in understanding the following information: Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehic ...

    Trailer Towing Weights (Maximum Trailer Weight Ratings)
    The following chart provides the maximum trailer weight ratings towable for your given drivetrain. When Towing Trailers With Gross Trailer Weight (GTW) Between 3,500 Lbs (1 588 kg) And 5,000 Lb ...

    See also:

    Use
    • Pull the cover over the cargo and hook it into the holes in the rear cargo area pillars. • To retract (roll up) the cover, release it from the holes and guide it toward the rear seat back ...

    Safety belt extension assembly
    If the safety belt is too short when fully extended, a safety belt extension assembly can be obtained from an authorized dealer. Use only extensions manufactured by the same supplier as the safety ...

    If you have accidentally triggered the alarm system
    To stop the alarm Do any of the following operations: - Press any button on the remote transmitter. - Turn the ignition switch to the “ON” position. ...