Mitsubishi Outlander: Tools and jack
Storage
The tools and jack are stowed on the right side of the luggage area. The storage location of the tools and jack should be remembered in case of an emergency.
1- Jack. 2- Tools.
Tools
1- Tool case. 2- Wheel nut wrench. 3- Jack bar. 4- Towing hook.
Jack
To remove
1. Turn the knob (A) anticlockwise and remove the lid (B).
2. Remove the fastening band (C) and remove the tools.
3. Retract the jack and remove it from its installation fitting (D).
To store
1. Retract the jack, then return it to its original position. 2. Extend the jack and firmly secure it.
3. Return the tools to the tool bag, return it to its original position, and firmly fasten with the fastening band. 4. Install the lid and turn the knob clockwise.
Engine overheating
When the engine has overheated, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. The screen will then cha ...
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location. 1.
Park the vehicle on level and stable ground, free of loose pebbles, etc.. 2. Set
the parking brake firmly. 3. Turn the ...
See also:
On-Board Vehicle Computers and Event Data Recorders
Your vehicle is equipped with on-board computer systems which monitor and control
several aspects of vehicle performance, including the following:
• Emission-related components and engine parame ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...
Important Safety Precautions
To eliminate potential hazards, read
the instructions before you begin,
and make sure you have the tools
and skills required.
Make sure your vehicle is parked
on level ground, the parking bra ...
