Subaru Forester: To install the cover housing
1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.
2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers.
To remove the cover
1. Rewind the cover.
2. Push the switch that is next to the right
end of the cover housing.
3. Take it off the retainer. ...
Cargo tie-down hooks
Cargo tie-down hooks
The cargo area is equipped with four tiedown
hooks so that cargo can be secured
with a cargo net or ropes.
When using the tie-down hooks, turn them
down out of the sto ...
See also:
Select lever and gear position indicator (AT models)
Type A
Type B
This indicator shows the position of the
select lever.
When the manual mode is selected, the
gear position indicator (which shows the
current gear selection) and the ups ...
Play file
Refer to “Play file”. ...
Attaching child safety seats with LATCH (Lower Anchors andTethers for CHildren) attachments
The LATCH system is composed of three vehicle anchor points: two (2)
lower anchors located where the vehicle seat back and seat cushion meet
(called the “seat bight”) and one (1) top tether anch ...
