Toyota RAV4: Taking out the spare tire (vehicles without the spare tire cover)
Using the wheel nut wrench, loosen the hold-down nuts by turning them counterclockwise until they can be loosened by hand. Follow the order shown in the illustration.
2 Remove all the wheel nuts and the spare tire. When placing the spare tire on the ground, make sure the wheel design side faces up to avoid scratching the wheel surface.
Taking out the spare tire (vehicles with the spare tire cover)
Open the back door. Unlock the latch handle which is on the bottom of the spare tire cover. 2 Close the back door. Remove the spare tire cover by holding the bottom and lifting it up and awa ...Replacing a flat tire
Chock the tires. 2 Remove the wheel ornament using the wheel nut wrench as shown below. 16-inch wheel To protect the wheel ornament, place a rag between the wrench and the wheel ornament, ...See also:
Recent Calls
Use the Recent Calls command to access
outgoing, incoming or missed calls.
“Outgoing” A
Use the Outgoing command to list the outgoing
calls made from the vehicle.
“Incoming” B
Use th ...
Head Restraints
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rear
impact. Head restraints should be adjusted so that the top
of the head restraint is ...
Wind Buffeting
Wind buffeting can be described as the perception of
pressure on the ears or a helicopter-type sound in the
ears. Your vehicle may exhibit wind buffeting with the
windows down, or the Sky Slider ...