Mercedes-Benz GLK-Class: Tail lamp
- Switch off the lights.
- Open the cargo compartment.
- Open the side trim panel ().
- Pull out connector 2.
- Press retaining lugs 1 simultaneously in the direction of the arrow and pull the bulb holder out.
Bulb holder without LED turn signal lamp
- Tail lamp/brake lamp
- Turn signals
- Backup lamp
- ear fog lamp/tail lamp
- Side marker lamp
- Lightly press the corresponding bulb into the holder, turn it counter-clockwise and remove it from the bulb holder.
- Insert the corresponding new bulb into the bulb holder and turn it clockwise.
- Attach the bulb holder and press firmly. The retaining lugs on the bulb holder engage audibly.
- Insert the connector.
- Close the side trim panel ().
Opening and closing the side trim panels
You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel Right-hand side trim panel To open: turn release kno ...License plate lamps
Switch off the lights. Open the tailgate. Press lug 2 of license plate lamp 1 in the direction of the arrow and remove license plate lamp lens 1. Remove license plate lamp lens 1. Repl ...See also:
Forward Collision Alert (FCA) System
For vehicles with FCA, this system is intended to help avoid or reduce the harm
caused by front-end crashes. FCA provides a flashing visual alert and beeps when
approaching a vehicle directly ahea ...
Introduction
The Dynamic Stability and Traction Control
system (DSTC) consists of a number of functions
designed help reduce wheel spin, counteract
skidding, and to generally help improve
directional stabi ...
Instrument panel
1) Door locks
2) Outside mirror switch
3) Illumination brightness control
4) Light control lever
5) Combination meter
6) Wiper control lever
7) Hazard warning flasher switch
8) Audio ...