GMC Terrain: Starting the Engine Using Remote Start
To start the engine using the remote start feature:
1. Press and release on the RKE transmitter.
2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.
3. The key must be inserted and turned to ON/RUN before driving.
The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.
Remote Vehicle Start
The vehicle may have this feature that allows you to start the engine from outside the vehicle. (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. ...Extending Engine Run Time
For a 10-minute extension, repeat Steps 1 and 2 while the engine is still running. The remote start can be extended once. When the remote start is extended, the second 10 minutes will start immedia ...See also:
Replacing an air filter
1. Remove the glove box.
(1) Open the glove box.
(2) Remove the damper shaft from the
glove box.
(3) Pull out the glove box.
2. Remove the air filter.
3. Replace the air filter element ...
Heated Mirrors — If Equipped
These mirrors are heated to melt frost or ice. This
feature is activated whenever you turn on the rear
window defroster. Refer to “Rear Window Features” in
“Understanding The Features of ...
Seat belts
Do not allow any water,
cleaning
products, or fabric from cloths to enter
the seat belt mechanism. Any
substance which enters the
mechanism may affect the
performance of the seat belt in an
i ...