Mitsubishi Outlander: Seat belt inspection - Seat and seat belts - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Seat belt inspection


● Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic parts. Replace the belt assembly if defective.
● A dirty belt should be cleaned with neutral detergent in warm water. After rinsing in water, let it dry in the shade. Do not attempt to bleach or re-dye the belts because this affects their characteristics.

WARNING:
● We recommend you to have all seat belt assemblies including retractors and attaching hardware inspected after any collision. We recommend that seat belt assemblies in use during a collision be replaced unless the collision was minor and the belts show no damage and continue to operate properly.
● Do not attempt to repair or replace any part of the sat belt assemblies; we recommend you to have this work done by a MITSUBISHI MOTORS Authorised Service Point. Incorrect repair or replacement result in serious injury in the event of a collision.
● Once the pre-tensioner has activated, it cannot be re-used. It must be replaced together with the retractor.

    Child restraint
    When transporting children in your vehicle, some type of child restraint system should always be used according to the size of the child. This is required by law in most countries. The regulations ...

    Supplemental restraint system (SRS)-airbag
    The information for SRS airbags includes important information concerning the driver’s and front passenger’s airbags, the side airbags and the curtain airbags. The SRS airbags are designed to ...

    See also:

    Stowing the jack and tools
    • Make sure the jack is fully lowered. • Reclip the tools onto the jack making sure that the tools are fully contained by the clips as shown. • Reinstall the jack in the pocket with the l ...

    Intelligent Key system (if so equipped)
    - Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...

    Before checking or servicing in the engine compartment
    - Always stop the engine and set the parking brake firmly to prevent the vehicle from moving. - Always let the engine cool down. Engine parts become very hot when the engine is running and ...