Ford Escape: Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
carefully disconnect the electrical
connector from the bulb.
3. Remove the bulb from the lamp
assembly by pulling out the bulb
while squeezing the upper and lower
snap clips at the same time.
Install the new bulb in reverse order.
Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position. 2. Press the lever and carefully pry the license plate lamp assembly (located above the license plate) from the liftgate. 3. Rotate the b ...Driver Controls
...See also:
Opening
You can open the tailgate automatically using the SmartKey or the handle in the
tailgate.
Open or close the tailgate fully using the automatic function if you have stopped
the tailgate in an inte ...
Reading Lamps
The reading lamps are located on the overhead console. These lamps come on automatically
when any door is opened.
For manual operation, press the button next to each lamp to turn it on or off. ...
Snow tires
- When replacing original tires with
winter (snow) tires, make sure
you use only the same size,
construction and load range as
the original tires listed on the tire
placard. Using other ...