GMC Terrain: Removing the Spare Tire and Tools - Tire Changing - Wheels and Tires - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Removing the Spare Tire and Tools

To access the spare tire and tools:

1. Open the liftgate. See Liftgate on page 2‑9.
2. Lift the load floor up.

Coin/Pierce Jack with One-Piece Wrench

Coin/Pierce Jack with One-Piece Wrench

A. Extension
B. Wheel Wrench
C. Jack

Hex-Head Jack with Three-Piece Wrench

Hex-Head Jack with Three-Piece Wrench

A. Wheel Wrench
B. Jack

3. If you have a coin/pierce jack and one-piece wrench, remove the extension (A), wheel wrench (B) and jack (C).

If you have a hex-head jack and three-piece wrench, remove the wheel wrench (A) and jack (B).

Place the tools next to the tire being changed.

4. Turn the retainer nut counterclockwise and remove the spare tire.

4. Turn the retainer nut counterclockwise and remove the spare tire.
5. Place the spare tire next to the tire being changed.

    Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10‑65 for more information. 2. For vehicles with a wheel cover or center cap, pull the cover or center cap away from ...

    See also:

    Effect vehicle modifications made for persons with disabilities may have on SUBARU advanced frontal airbag system operation (U.S. only)
    Changing or moving any parts of the front seats, rear seat, seatbelts, front bumper, front side frame, radiator panel, instrument panel, combination meter, steering wheel, steering column, tir ...

    High-beam headlamps
    To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to or or . Press the combination switch beyond th ...

    Windshield wiper and washer switch
    In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the wi ...