Ford Escape: Removing the jumper cables - Jump starting - Roadside Emergencies - Ford Escape Owner's ManualFord Escape: Removing the jumper cables

Remove the jumper cables in the reverse order that they were connected.

Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery.

1. Remove the jumper cable from the ground metal surface.
2. Remove the jumper cable on the negative (-) terminal of the booster vehicle’s battery.
3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery.
4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’s battery.

Wrecker towing

    Jump starting
    1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both eng ...

    Wrecker towing
    If you need to have your vehicle towed, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider. It is recommen ...

    See also:

    Care of cassette tapes
    Proper care of your cassette tapes will extend the tape life and increase your listening enjoyment. Always protect your tapes and cassette cases from direct sunlight, severely cold and dusty ...

    Audio Systems
    There are two types of audio system as shown below: Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLAYER WITH CD CHANGER CONTROL Precautions • When the inside of t ...

    Ventilators
    1- Centre ventilators. 2- Side ventilators. Air flow and direction adjustments Centre ventilators Move the knob (A) to adjust the air flow direction. To close the ventilator, fully move the kno ...