Volvo XC60: Remote key not functioning - Other alarm-related functions - Alarm - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Remote key not functioning

If the remote key is not functioning properly, the alarm can be turned off and the vehicle can be started as follows:

1. Open the driver's door with the key blade (see page 61 for information on detaching the key blade).

> This will trigger the alarm.

2. Insert the remote key into the ignition slot

2. Insert the remote key into the ignition slot (also on vehicles with the optional keyless drive). This will turn off the alarm.

3. Start the engine.

    Audible/visual alarm signal
    • An audible alarm signal is given by a battery powered siren. The alarm cycle lasts for 30 seconds. • The visual alarm signal is given by flashing all turn signals for approximately 5 minu ...

    Reduced alarm function
    Turning off the accessory alarm sensors In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ...

    See also:

    Keys
    For greater convenience, the same key operates all the locks in your Hyundai. However, because the doors can be locked without a key, carrying a spare key is recommended in case you accident ...

    General notes
    If you cannot lock or unlock the vehicle with the SmartKey, either the battery in the SmartKey is discharged, the SmartKey is faulty or the starter battery is discharged. Check the battery in ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑37. For any bulb changing procedure not listed in this section, contact your dealer. ...