Mercedes-Benz GLK-Class: Releasing the parking lock manually
In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away.
Do not use any sharp-edged objects to remove the selector lever gaiter from
the center console. This could damage the selector lever gaiter.
- Apply the parking brake.
- Pry off selector lever gaiter : with a flat, blunt object, (e.g. a screwdriver wrapped in cloth) from the right-hand edge, pulling it up and out.
- Press release buttons ; down and simultaneously move the selector lever out of position P.
The selector lever can now be moved freely until it is returned to position P.
Restricting the shift range
X Press the selector lever to the left towards D–.
The automatic transmission shifts down one gear and restricts the shift range
to the relevant gear.
If the engine exceeds the maximum engine ...
Transfer case
This section is only valid for vehicles with 4- wheel drive (4MATIC). Power is
always transmitted to both axles.
Performance tests may only be carried out on a 2-axle dynamometer. The brake
sy ...
See also:
Inflation pressure
Tire inflation pressure table
The following tire pressures are recommended by Volvo for your vehicle. Refer
to the tire inflation placard (see page 289 for its location) for information
specific ...
Registering by inputting manually
1. Select the “MANUAL INPUT” menu by
operating the “TUNE/TRACK/CH” dial.
2. Input the phone number to be registered.
3. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/C ...
Delete Uconnect™ Phonebook Entry
NOTE: Editing phonebook entries is recommended
when the vehicle is not in motion.
• Press the button to begin.
• After the “Ready” prompt and the following beep, say
“Phonebook Delete ...
