GMC Terrain: Power Liftgate 3/4 Mode
To program the liftgate opening height:
1. Turn the liftgate switch to either the MAX , or the 3/4 mode position and power open the liftgate.
2. Stop the liftgate movement at the desired height by pressing any liftgate switch. Manually adjust the liftgate position if required.
3. Press and hold the button on the liftgate adjacent to the latch until the turn signals flash and a beep sounds to indicate that the new setting is recorded.
When power opened with the 3/4 mode selected, the liftgate stops at the new set position.
If there is no audible and visual feedback when setting the intermediate stop position, the liftgate height is being set below the 3/4 open height minimum (approximately 1.5 m or 5 ft). The liftgate cannot be set below that minimum and the new setting will not be recorded.
Obstacle Detection Features
If the liftgate encounters an obstacle during a power open or close cycle, a
warning chime will sound and the liftgate will automatically reverse direction to
the full closed or open position. Aft ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, turn the mode switch to the OFF position.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and closed. ...
See also:
Hands-free system (if equipped)
NOTE
- For models with the genuine
SUBARU navigation system, refer to
the Owner’s Manual supplement for the
navigation system.
- When selling your vehicle, make
sure that you initialize t ...
Front passenger sensing system
For airbags to do their job they must inflate with great force, and this
force can pose a potentially deadly risk to occupants that are very close
to the airbag when it begins to inflate. For some o ...
OnStar®
If equipped, this vehicle has a comprehensive, in-vehicle system that can connect
to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic
Services. See OnStar Overview on ...
