Subaru Forester: Photosensors
Photosensors
The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim the mirror to eliminate glare and preserve your vision. For this reason, use care not to cover the sensors with stickers, or other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator.
Auto-dimming mirror/compass with HomeLink® (if equipped)
Auto-dimming mirror/compass with HomeLink® (if equipped) 1) HomeLink® button 1 2) HomeLink® button 2 3) LED 4) HomeLink® button 3 5) Sensor 6) Automatic dimming on/off button 7) C ...Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and ...See also:
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency. The hazard warning flashers can always be operated, regardless
of the position of the ignit ...
Spare tire and tools
Your Hyundai is delivered with the following:
Spare tire and wheel.
Wheel nut wrench, Wrench bar.
Jack. ...
Snow tires
If you equip your car with snow tires,
they should be the same size and have
the same load capacity as the original
tires. Snow tires should be installed on
all four wheels; otherwise, poor ha ...