Nissan Rogue: Parking brake
- Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident.
- Do not release the parking brake from outside the vehicle.
- Do not use the gear shift in place of the parking brake. When parking, be sure the parking brake is fully engaged.
- Do not leave children unattended in a vehicle. They could release the parking brake and cause an accident.
To apply: Fully depress the parking brake pedal 1 .
To release:
1. Firmly apply the foot brake 2 .
2. Depress the parking brake pedal 1 and the parking brake will be released.
3. Before driving, be sure the brake warning light goes out.
Shift lock release
Shift lock release If the battery charge is low or discharged, the selector lever may not be moved from the P (Park) position even with the brake pedal depressed and the selector lever butt ...Cruise control
...See also:
Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly level
roads. The system may have difficulty maintaining
the correct distance to a vehicle ahead
on steep inclines, if the vehicle is carrying a
heav ...
Turning ACC off completely
• From standby mode, press once.
• From active mode, press twice.
The set speed and time interval are then
cleared from the system's memory and cannot
be resumed by pressing . ...
In case a problem occurs
If you cannot activate a device using the
corresponding HomeLink® button after
programming, contact HomeLink® at
www.homelink.com or call 1-800-355-
3515 for assistance. ...