Mitsubishi Outlander: Parking brake
To park the vehicle, first bring in to a complete stop, fully engage the parking brake.
To apply
1- Pull the lever up without pushing the button at the end of hand grip.
To release
1- Pull the lever up slightly. 2- Push the button at the end of hand grip. 3- Push the lever downward.
CAUTION:
● Before driving, be sure that the parking brake is fully released and brake warning
lamp is off. If you drive without the parking brake fully released, “RELEASE PARKING
BRAKE” will appear on the information screen in the multi-information display. If
a vehicle is driven without releasing the parking brake, the brakes will be overheated,
resulting in ineffective braking and possible brake failure.
Running-in recommendations
During the running-in period for the first 1,000 km (600 miles), it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future econo ...Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position. Parking on a hill To prevent the vehicle from rolling, follow these pro ...See also:
Adjusting sound quality and volume balance
1 Press to enter iPod menu mode.
2 Press changes sound modes. ...
Matte finish care
If your vehicle has a clear matte finish, observe the following instructions
in order to avoid damage to the paintwork due to incorrect care.
These notes also apply to light alloy wheels with a cle ...
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on
briefly when the engine is started. It provides information about tire pressures
and the TPMS.
When the Light Is O ...