Volvo XC60: On and off
To switch Collision Warning on or off, press MY
CAR on the center console control panel and
go to Settings
Car settings
Driver
support systems
Collision Warning. If
Collision Warning is on, the system will perform
a self-test each time the engine is started by
briefly illuminating the warning light. See page
134 for more information about the menu system.
When the engine is switched on, the Collision Warning setting that was being used when it was switched off will be the default setting.
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed. ...
Activating/deactivating warning signals
The collision warning system’s visual signals
are activated automatically when the engine is
started if the collision warning system is
switched on.
The audible warning signal can be activate ...
See also:
Driving with the Blind Spot Mirror
Actual Mirror View
1. When the approaching vehicle is a long distance away, the image in the main
mirror is small and near the inboard edge of the mirror.
2. As the vehicle gets closer, the imag ...
R (Reverse)
This position is for backing the vehicle.
To shift from the “N” to “R” position, stop
the vehicle completely then move the
lever to the “R” position.
When the ignition switch has bee ...
Important safety notes
The rear view camera is an optical parking aid. It shows the area behind your
vehicle in the COMAND display.
WARNING
Make sure that no persons or animals are in the maneuvering range. Otherwi ...
