Mitsubishi Outlander: Making a flat seat
By removing the head restraints and fully reclining the seatbacks of the seats, one large flat seat is achieved.
WARNING:
● Never drive while there are occupants sitting on the flat seat. This can be extremely
dangerous.
CAUTION:
● To make a flat seat, stop the vehicle in a safe place.
● Make sure the seat is adjusted by an adult or with adult supervision for correct
and safe operation.
● When sliding the seat, be sure not to catch your hand or leg.
● Do not walk around on top of the seats after they have been laid flat.
● To ensure the seats are locked securely, attempt to move them back and forth.
● Do not jump on, or impact the seatbacks heavily.
● To raise the seatback, raise it slowly while supporting it with your hands. Never
let a child perform this operation. Doing so could result in an accident.
1. Remove the head restraints from the front seats, raise the armrest and remove the cargo area cover (if so equipped) (refer to “Head restraints” on page 2-22 and “Cargo area cover” on page 5-131).
2. Move the second seat fully to the rear (refer to “To adjust forward or backward” on page 2-6).
3. Slide the front seats fully forward, then recline the seatbacks backwards to achieve a flat surface (refer to “To adjust forward or backward” on page 2-6 and “To recline the seatback” on page 2-7).
4. Recline the seatbacks of the second seat backwards (refer to “To recline the seatback” on page 2-7).
5. The flat seat configuration is now complete. To return the seats to the normal position, reverse the above procedure.
Making a luggage room
WARNING: ● When making a luggage area, never arrange the seats while the vehicle is being driven or is on an incline. The seats could move unexpectedly or more than required and cause a se ...Seat belts
To protect you and your passengers in the event of an accident, it is most important that the seat belts be worn correctly While drive. The front seat belts have a pre-tensioner system. These belt ...See also:
Oil Check
Wait a few minutes after turning the
engine off before you check the oil.
1. Remove the dipstick (orange
handle).
2. Wipe off the dipstick with a clean
cloth or paper towel.
3. Insert the d ...
Tire inflation pressure
■ Tire inflation pressure
The recommended cold tire inflation pressure and tire size is displayed
on the tire and loading information label.
■ Inspection and adjustment procedure
1 ...
Tire pressures and wear
Maintaining the correct tire pressures
helps to maximize the tires’ service lives
and is essential for good running performance.
Check and, if necessary, adjust
the pressure of each tire (inc ...