Mercedes-Benz GLK-Class: Lowering the vehicle
WARNING
Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise damage the wheel rim.
- Place the ratchet wrench onto the hexagon nut of the jack so that the letters AB are visible.
- Turn the ratchet wrench until the vehicle is once again standing firmly on the ground.
- Place the jack to one side.
- Tighten the wheel bolts evenly in a crosswise pattern in the sequence indicated (: to A). The tightening torque must be 110 lb-ft (150 Nm).
WARNING
Have the tightening torque checked immediately after a wheel is changed. The wheels could come loose if they are not tightened to a torque of 110 lb/ft (150 Nm).
- Turn the jack back to its initial position and store it together with the rest of the tirechange tool kit in the cargo compartment.
- Transport the defective wheel in the cargo compartment.
For further information on stowing the collapsible spare wheel, see ().
When you are driving with the collapsible spare wheel mounted, the tire pressure loss warning system or the tire pressure monitoring system cannot function reliably. Only restart the tire pressure loss warning system/tire pressure monitoring system when the defective wheel has been replaced with a new wheel.
Vehicles with tire pressure monitoring system: all mounted wheels must be equipped with functioning sensors and the defective wheel should no longer be in the vehicle.
Inflating the collapsible spare wheel
WARNING Inflate the collapsible spare wheel only after the wheel is properly attached. Inflate the collapsible spare wheel using the tire inflation compressor before lowering the vehicle. ...Battery
...See also:
How to use this manual
Consult the Table of Contents to determine which section
contains the information you desire.
Since the specification of your vehicle depends on the
items of equipment ordered, certain descripti ...
Sun visors
Sun visors
1. To block out glare from the front, swing
down the sun visor 1 .
2. To block glare from the side, remove the sun
visor from the center mount and swing it to
the side 2 . ...
Symbols used in this handbook
Safety warnings indicate either a procedure which must be followed
precisely, or
information that should be considered with great care, in order to avoid the
possibility
of personal injury.
C ...