Jeep Liberty: Loose Fuel Filler Cap Message - Adding Fuel - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a gASCAP” message will display in the odometer or a “CHECK GASCAP” message will be displayed in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further review.

Tighten the fuel filler cap until a “clicking” sound is heard. This is an indication that the fuel filler cap is properly tightened. Refer to “Onboard Diagnostic System” in “Maintaining Your Vehicle” for further information.

    Fuel Filler Cap (Gas Cap)
    The gas cap is located behind the fuel filler door, on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehi ...

    See also:

    Adjusting the height of rear view mirror
    Adjust the height of the rear view mirror by moving it up and down. ■To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate ...

    Interior light
    Map Light Push in the map light switch to turn the light on or off. This light is convenient as a map light at night or as a personal light for the driver and the passenger. INTERIOR LIGHT ...

    Steering Wheel Controls
    Some audio steering wheel controls can be adjusted at the steering wheel. : Press to interact with the available Bluetooth or OnStar systems. : Press to silence the vehicle speakers only. Pre ...