Volvo XC60: License plate lighting - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: License plate lighting

1. Remove the screws with a screwdriver.

1. Remove the screws with a screwdriver.

2. Carefully detach the entire bulb housing and pull it out.

3. Replace the bulb.

4. Reinsert the entire bulb housing and tighten the screws.

    Brake lights and taillights
    The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

    Cargo area lighting
    NOTE Before starting to replace a bulb, see page 322. 1. Insert a screwdriver and gently turn so that the bulb housing comes loose. 2. Replace the bulb. 3. Check that the bulb illuminates an ...

    See also:

    Rear fog lamps (amber)
    Rear fog lamps (amber) Illuminates when the rear fog lamps are switched on. ...

    Checking the oil level
    Check the engine oil level at each fuel stop. 1. Park the vehicle on a level surface and stop the engine. Turbo models Non-turbo models 2. Pull out the level gauge, wipe it clean, and in ...

    Fuel Filler Cap
    The fuel filler cap is located on the right rear side of the vehicle. The fuel filler door can be unlocked by pulling up on the opener lever located on the outboard side of the driver’s seat ...