GMC Terrain: License Plate Lamp - Bulb Replacement - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: License Plate Lamp

To replace one of these bulbs:

1. Open the liftgate partway. See Liftgate on page 2‑9.

Passenger Side Shown, Driver Side Similar

Passenger Side Shown, Driver Side Similar

2. Push the left end of the lamp assembly toward the right.

3. Pull the lamp assembly down to remove it from the liftgate.

A. Bulb Socket

A. Bulb Socket
B. Bulb
C. Lamp Assembly

4. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).

5. Pull the bulb (B) straight out of the bulb socket.

6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly.

7. Turn the lamp assembly into the liftgate engaging the clip side first.

8. Push on the lamp side opposite the clip until the lamp assembly snaps into place.

    Back–Up Lamp
    Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...

    Replacement Bulbs
    For replacement bulbs not listed here, contact your dealer. ...

    See also:

    Select Another Mobile Phone
    This feature allows you to select and start using another phone paired with the Uconnect™ Phone. • Press the button to begin. • After the “Ready” prompt and the following beep, say ...

    Gear Oil
    Specified Gear Oil When replacing gear oil, use gear oil with the appropriate viscosity and grade as shown in the charts below. We highly recommend you use SAE 75W-90 gear oil (SAE 80W-90 for fro ...

    Compass Variance
    Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences, the variance should be set for the zone where the vehicle is driven, per the zo ...