Nissan Rogue: Key positions
LOCK (0)
Except for the Intelligent Key equipped model:
The key can only be removed from the ignition switch at this position.
For the Intelligent Key equipped model:
PUSH OFF -
The ignition switch is locked at this position.
PUSH ON -
The ignition switch will be unlocked while carrying the Intelligent Key.
OFF
The power supply is turned off.
ACC
The electrical accessory power activates without the engine turned on.
ON (3)
The ignition system and the electrical accessory power activate without the engine turned on.
START (4)
The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position.
As soon as the engine has started, release the ignition switch immediately.
Continuously Variable Transmission (CVT)
The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. - When turning the ignition switch to ...Before starting the engine
- Make sure the area around the vehicle is clear. - Check fluid levels such as engine oil, coolant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you re ...See also:
Selection of manual mode
With the vehicle either moving or stationary,
move the select lever from the “D”
position to the manual gate then move it to
the “+” end or “−” end of the manual gate
to ...
Replacement Parts
The emissions control systems are
designed and certified to work together
in reducing emissions to
levels that comply with the Clean Air
Act. To make sure the emissions
remain low, you shoul ...
How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until
the entire belt is extracted.
3. Allow the belt to retract. As the belt retracts, you will
...