GMC Terrain: Instrument Panel Fuse Block - Electrical System - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Instrument Panel Fuse Block

The instrument panel fuse block is located on the passenger side panel of the

The instrument panel fuse block is located on the passenger side panel of the center console. To access the fuses, open the fuse panel door from the passenger side by pulling it out.

To reinstall the door, insert the tabs on the top of the door into the console first, then push the door back into its original location.

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Wheels and Tires Instrument Panel Fuse Block

    Engine Compartment Fuse Block
    To remove the fuse block cover, squeeze the clips on the cover and lift it straight up. See Engine Compartment Overview on page 10‑6. Notice: Spilling liquid on any electrical component on ...

    See also:

    Battery charge (red)
    Battery charge (red) Illuminates briefly when the ignition is switched on and extinguishes when the engine is started. If the lamp remains on or illuminates while driving, there is a fault with ...

    Rear view camera (if equipped)
    Rear view camera (if equipped) A rear view camera is attached to the rear gate. When the ignition switch is “ON” and the shift lever (MT models) or select lever (AT models) is set to ...

    Installing a Child Seat with a Tether
    A child seat with a tether can be installed in any seating position in the back seat. Each rear outside seating position has an anchorage point on the seatback, and the center seating positio ...