Nissan Rogue: Installing top tether strap
Installing top tether strap
First secure the child restraint with the LATCH system (rear outboard seating positions only) or the seat belt as applicable.
1. Remove the anchor cover from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback.
3. Secure the tether strap to the tether anchor bracket that provides the straightest installation.
4. Tighten the tether strap according to the manufacturer’s instructions to remove any slack.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
Forward-facing child restraint installation using the
seat belts
- The three-point seat belt with Automatic
Locking Retractor (ALR) must
be used when installing a child
restraint. Failure to use the ALR
mode will result in the child restraint
not bein ...
Booster seats
Precautions on booster seats
If a booster seat and seat belt are not
used properly, the risk of a child being
injured in a sudden stop or collision
greatly increases:
- Make sure the shou ...
See also:
Hazard warning lamps
The hazard warning lamps automatically switch on if:
an air bag is deployed.
the vehicle is slowed down severely from a speed of over 45 mph(70 km/h)
and comes to a halt.
To switch on the ...
Disabling trailer sway control
Trailer sway control can be disabled during any key cycle. Pressing and
holding the stability control button for more than five seconds will
disable the trailer sway control feature and the stabilit ...
View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the
rear-view mirror.
WARNING
The rear view camera is only an aid and may display obstacles
from a distorted pe ...
