Volvo XC60: Installing the ball holder - Detachable trailer hitch (accessory) - Towing a trailer - During your trip - Volvo XC60 Owner's ManualVolvo XC60: Installing the ball holder

1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly.

2. Slide the ball holder into the hitch assembly.

3. Align the hole in the ball holder with the one in the hitch assembly.

4. Slide the locking bolt through the hitch assembly/ball holder.

5. Insert the cotter pin in the hole at the end of the locking bolt.

    Detachable trailer hitch (accessory)
    Detachable trailer hitch (accessory) a Ball holder b Locking bolt c Cotter pin d Hitch assembly e Safety wire attachment ...

    Removing the ball holder
    1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch assembly. 2. Pull the ball holder out of the hitch assembly. NOTE A cover for the hitch as ...

    See also:

    Disconnecting an external device
    The external device is automatically disconnected from the audio system if it is moved out of range. ...

    OnStar®
    If equipped, this vehicle has a comprehensive, in-vehicle system that can connect to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic Services. See OnStar Overview on ...

    Infotainment System Overview
    The infotainment system is controlled by using the buttons on the faceplate and the touch screen. See “Infotainment Control Buttons” in this section for more information. ...