Mercedes-Benz GLK-Class: Important safety notes - Overview of climate control systems - Climate control - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Important safety notes

WARNING WARNING

Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others. Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.

WARNING WARNING

Follow the recommended settings for heating and cooling given on the following pages. Otherwise, the windows could fog up, impairing visibility and endangering you and others.

Automatic climate control controls the temperature and the humidity in the vehicle interior and filters undesirable substances from the air.

Automatic climate control is only operational when the engine is running. Optimum operation is only achieved if you drive with the side windows and panorama roof with power tilt/sliding panel closed.

convenience opening feature (). This will speed up the cooling process Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (). This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.

filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g. heavy air pollution, the interval may be shorter than stated in the Service Booklet.

an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.

    Control panel for dual-zone automatic climate control
    To set the temperature, left () To set climate control to automatic () To switch climate control on/off () To switch the MONO function on/off14() To switch maximum cooling MAX COOL on/off ...

    See also:

    Transmission code designations
    You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. ...

    Instrument brightness control
    The instrument brightness control operates when the headlight switch is in the or position. Turn the control A to adjust the brightness of the meter panel and the instrument panel lights. ...

    Starting the Engine
    Before Starting the Engine 1) Make sure the parking brake is set fully. 2) Manual Transmission – Shift into “N” (Neutral) and depress the clutch pedal all the way to the floor. Hold it while ...