Subaru Forester: Illuminated entry
The interior (dome) light and the map light will illuminate when the “” button is pressed. These lights stay illuminated for approximately 30 seconds if any of the doors or the rear gate is not opened.
If the “” button is pressed before 30 seconds have elapsed, these lights will turn off. The lights must be set to the DOOR position in order for this function to operate.
A SUBARU dealer can change the illumination period setting of the interior light in accordance with your preference. Contact the nearest SUBARU dealer for details.
Unlocking the rear gate
Unlocking the rear gate Pressing the “” button unlocks the rear gate. An electronic chirp will sound twice and the turn signal lights will flash twice. ...Vehicle finder function
Use this function to find your vehicle parked among many vehicles in a large parking lot. Provided you are within 30 feet (10 meters) of the vehicle, pressing the “” button three times in ...See also:
Daytime running light system (if equipped)
The brightness of the illumination of
the high beam headlights is reduced
by the daytime running light system.
The light switch must always be
turned to the “” position
when it
is ...
Downhill assist control system
With the downhill assist control system, the vehicle is able to
descend a steep hill while maintaining a constant low speed of about
3 mph (5 km/h) without brake pedal operation.
■ Activating ...
Important information
WARNING
When the climate control system is deactivated, the outside air supply and circulation
are also deactivated. Only choose this setting for a short time. Otherwise the windows
could fo ...