Jeep Liberty: Headlight Time Delay — If Equipped
This feature is particularly useful when exiting your vehicle in an unlit area. It provides the safety of headlight illumination for about 90 seconds after turning the ignition switch to the LOCK position.
To activate the delay, turn the ignition switch to the LOCK position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when you turn off the headlights. Only the headlights will illuminate during this time.
If you turn the headlights, or parking lights, or ignition switch ON again, the system will cancel the delay.
If you turn the headlights off before the ignition, they will turn off in the normal manner.
The Headlight delay time is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Customer-Programmable Features” in “Understanding Your Instrument Panel” for further information.
Headlights With Wipers (Available With Automatic Headlights Only)
When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever is placed in the AUTO position. In addition, the headli ...Daytime Running Lights — If Equipped
The headlights will turn on as Daytime Running Lights (DRL) and operate at lower intensity whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is r ...See also:
Dolby Pro Logic
Dolby Surround Pro Logic II® distributes stereo
sound's two channels to the left/right and front/
rear speakers.
Dolby Pro Logic II and the symbol
are
trademarks of Dolby Laboratories Lic ...
Unfastening the seatbelt
Unfastening the seatbelt
Push the button on the buckle.
Before closing the door, make sure that
the belts are retracted properly to avoid
catching the belt webbing in the door. ...
Transmission code designations
You can find a transmission code on
the Safety Compliance Certification
Label. The following table tells you
which transmission each code
represents.
...