Jeep Liberty: Headlamps With Wipers (Available with Auto Headlights Only)
When on is selected, and the headlight switch is in the AUTO position, the headlights will turn on approximately 10 seconds after the wipers are turned on. If the headlights were turned on by this feature they will also turn off when the wipers are turned off. To make your selection, press and release the SELECT button until “ON” or “OFF” appears.
NOTE: Turning the headlights on during the daytime causes the instrument panel lights to dim. To increase the brightness, refer to “Lights” in “Understanding The Features Of Your Vehicle.”
Headlamp Off Delay
When this feature is selected, the driver can choose to
have the headlights remain on for 0, 30, 60, or 90 seconds
when exiting the vehicle. To make your selection, press
and release the SELECT ...
Easy Exit Seat — If Equipped
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle. To make your selection, press and release the
SELECT button until “On ...
See also:
Engine compartment
1 Engine compartment, upper
2 Engine compartment, front
3 Engine compartment, lower
Positions
These fuses are all located in the engine compartment
box. Fuses in C are located under A.
NOTE
...
Selecting a folder
■ Selecting folders one at a time
To select the desired folder, press
■ Selecting a folder and file from folder list
1 Press .
The folder list will be displayed.
2 Turn and press&n ...
Replacing tail/stop/turn/backup lamp bulbs
The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same
portion of the tail lamp assembly, one just below the other. Follow the
same steps to replace either bulb:
1. Make sure the ...
