Toyota RAV4: Gauges and meters
Vehicles without smart key system
The following gauges, meters and displays illuminate when the engine switch is in the “ON” position.
Vehicles with smart key system
The following gauges, meters and displays illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode.
1 Tachometer
Displays the engine speed in revolutions per minute.
2 Speedometer
Displays the vehicle speed.
3 Engine coolant temperature gauge
Displays the engine coolant temperature.
4 Fuel gauge
Displays the quantity of fuel remaining in the tank.
5 Trip information display
6 Automatic transmission shift position indicator lights
7 Odometer/trip meter
Odometer
Displays the total distance the vehicle has been driven.
Trip meter
Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to
record and display different distances independently.
8 Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and holding
the button will reset the trip meter when the trip meter is being displayed.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted. 1 Brighter 2 Darker When the headlight switch is turned on, the brightness will be reduced slightly unless the control dial is tu ...See also:
Settings made from the front center control panel
1 MEDIA
2 TUNE
3 OK/MENU
4 EXIT ...
The Starter Operates Normally
In this case, the starter motor’s
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using ...
Vehicle Dynamics Control OFF switch
Vehicle Dynamics Control OFF switch
Pressing the switch to deactivate the
Vehicle Dynamics Control system can
facilitate the following operations:
- a standing start on a steeply sloping
...