Toyota RAV4: Flattening front seatbacks
The front seats can be moved into a flat seat arrangement.
Manual seat
1 Slide the second seats as far back as possible.
2 Remove the front head restraint.
Slide the front seat further forward than the front-most lock position.
Pull the seatback angle adjustment lever up to unlock and push down the seatback. After returning the seat to its original position, be certain to replace the head restraint.
Power seat
1 Slide the second seats as far back as possible.
2 Remove the front head restraint.
Push the seat position adjusting switch forward to slide the seat to the front-most position.
Move the seatback angle adjusting switch backward to flatten the seatback. After returning the seat to its original position, be certain to replace the head restraint.
Front seats
Manual seat 1 Seat position adjustment lever 2 Seatback angle adjustment lever 3 Vertical height adjustment lever (driver’s side only) Power seat (driver’s side only) 1 Seat position a ...Active head restraints
When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly forward and upward to help reduce the risk of whiplash on the seat ...See also:
Turbo models
Turbo models
1) Power steering oil pump pulley
2) Front side belt
3) Alternator pulley
4) Air conditioner compressor pulley
5) Rear side belt
6) Crank pulley
A) 22 lbf (98 N, 10 kgf)
...
Tire rotation
Rotating your tires at the recommended interval (as indicated in the
Scheduled Maintenance chapter) will help your tires wear more evenly,
providing better tire performance and longer tire life.
...
Fuel gauge
Type A
1) Low fuel warning light
Type B
1) Low fuel warning light
The fuel gauge shows the approximate
amount of fuel remaining in the tank.
When the ignition switch is in the “LOCK†...