GMC Terrain: Fabric/Carpet
Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible using one of the following techniques:
○ Gently blot liquids with a paper towel. Continue blotting until no more soil
can be removed.
○ For solid soils, remove as much as possible prior to vacuuming.
To clean:
1. Saturate a clean lint-free colorfast cloth with water or club soda. Microfiber
cloth is recommended to prevent lint transfer to the fabric or carpet.
2. Remove excess moisture by gently wringing until water does not drip from the
cleaning cloth.
3. Start on the outside edge of the soil and gently rub toward the center. Fold
the cleaning cloth to a clean area frequently to prevent forcing the soil in to
the fabric.
4. Continue gently rubbing the soiled area until there is no longer any color transfer
from the soil to the cleaning cloth.
5. If the soil is not completely removed, use a mild soap solution followed only
by club soda or plain water.
If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet.
Following the cleaning process, a paper towel can be used to blot excess moisture.
Interior Glass
To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. Commercial glass cleaners may be used, if necessary, after cleaning the interior glass wit ...Instrument Panel, Vinyl, and Other Plastic Surfaces
Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution. Notice: Soaking or sat ...See also:
Liftgate
• To open the liftgate window,
unlock the liftgate (with the
power door locks or the remote
entry) and press the right side
control button located under the
license plate lamp shield.
• To o ...
Engine
Display messages
Possible causes/consequences and Solutions
The yellow
Check Engine warning lamp lights up while the engine is running.
There may be a malfunction, for ex ...
To Play a Disc
To load or play a disc, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
You operate the disc player with the
same controls used for the radio. To
select the disc player, ...