Volvo XC60: Engaging the cruise control function
Before a speed can be set, the cruise control system must be engaged (put in standby mode).
Press the symbol (1).
> The symbol illuminates and the text (---) mph (5) indicates that cruise control is in standby mode.
NOTE
• Putting cruise control in standby mode
does not set a cruising speed.
• When cruise control is in standby mode,
the driver's seat belt must be fastened
before a cruising speed can be set.
Operation
Steering wheel-mounted controls and display 1 Standby mode 2 Resume set speed 3 Deactivating 4 Activate/set speed 5 Set speed indicator (parentheses indicate standby mode) ...Setting a speed
Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...See also:
If the On Indicator is Lit for a Child Restraint
If a child restraint has been installed and the on indicator is lit:
1. Turn the vehicle off.
2. Remove the child restraint from the vehicle.
3. Remove any additional items from the seat such as bl ...
Fuel-filler cap
Fuel-filler cap
To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise to
remove.
2. Put the fuel-filler cap on the cap holder A
while refueling.
To install the fuel-fi ...
Four-wheel anti-lock brake system (ABS)
Your vehicle is equipped with an anti-lock braking system (ABS). This
system helps you maintain steering control during emergency stops by
keeping the brakes from locking. Noise from the ABS pump mo ...