Nissan Rogue: Compass (if so equipped)
When the ignition switch is turned to the ON position, the compass display B will indicate the direction of the vehicle’s heading.
If the display reads “C”, calibrate the compass by driving the vehicle in 3 complete circles at less than 5 MPH (8 km/h). You can also calibrate the compass by driving your vehicle on your everyday route. The compass will be calibrated once it has tracked 3 complete circles.
To turn on and off the compass manually, push
the 
switch
A while the ignition switch is in
the ON position.
Instrument brightness control
The instrument brightness control operates
when the headlight switch is in the or
position.
Turn the control A to adjust the brightness of
the meter panel and the instrument panel lights.
...
Zone variation change procedure
Zone map
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass readings.
Foll ...
See also:
Rear Vision Camera Error Messages
SERVICE REAR VISION CAMERA SYSTEM: This message can display on the radio screen
when the system is not receiving information it requires from other vehicle systems.
If any other problem occurs or i ...
Temperature control
The temperatures on the
driver and passenger sides
can be set separately. When
the vehicle is started, the
most recent setting is
resumed.
NOTE
Heating or cooling cannot be speeded up by ...
Services for People with Disabilities
Advisors provide services to help subscribers with physical disabilities and
medical conditions.
Push for help with:
○ Locating a gas station with an attendant to pump gas.
○ Finding ...
